HONGTAI Heavy-Duty Remote Control Diesel Brush Cutter (Kepu 195 Diesel Engine)

HT-BC800 Remote Control Brush Cutter: Heavy-Duty Land Clearing from a Safe Distance

Overgrown land, dense shrubs and tangled brush wear out ordinary mowers and put clearing crews at risk from flying debris, hidden obstacles and rough ground. The HONGTAI HT-BC800 remote control brush cutter is built for this work. A Kepu 195 industrial diesel engine provides heavy cutting power, while dual 48V pure copper brushless motors drive the tracks. The 800 mm (31.5 in) cutting head turns brush, shrubs and tall weeds into mulch, and the operator stays up to 1,000 m (3,280 ft) away.

The HT-BC800 is designed for land reclamation, forestry firebreak cutting, overgrown lot clearing, utility right-of-way maintenance and rough-terrain vegetation control. It is supplied factory direct to equipment dealers, land-clearing contractors, forestry services and rental fleets worldwide.

Heavy Diesel Power + Dual Brushless Drive

Kepu 195 Industrial Diesel Engine

Diesel delivers the high, steady torque that brush clearing demands. The Kepu 195 engine keeps the cutting rotor at 3,600 rpm through thick, woody growth, and consumes only about 1.1 L (0.29 US gal) of diesel per hour. Its 5 L (1.3 US gal) tank and diesel efficiency mean long working periods between refills, and diesel fuel is easy to source on farms, construction sites and forestry operations. EPA, CE and EU Stage V compliant engine options are available for North American and European markets.

2 × 650W Pure Copper Brushless Track Motors

• Independent drive for each track gives strong pulling torque and precise 360° zero-turn steering in tight, cluttered sites.
• Pure copper windings carry current efficiently and run cooler under continuous heavy load.
• Brushless design means no carbon brushes to wear out or replace, so drive motors need very little maintenance.
• 48V electrical system with electric start: start the machine at the push of a button, with no pull-starting a diesel in the field.

Thick Brush and Shrub Clearing

• 800 mm (31.5 in) heavy-duty cutting head at 3,600 rpm mulches dense brush, shrubs, saplings, briars and tall weeds in a single pass.
• 0 – 350 mm (0 – 13.8 in) remote cutting height: wide electric height adjustment from the remote lets operators cut right down to ground level for land reclamation, or raise the head to top tall growth and pass over rocks and stumps.
• Ground-hugging, low-profile chassis: a 700 mm (27.6 in) machine height and low ground clearance keep the cutter close to the work and the center of gravity low.
• Heavy-duty rubber tracks: high-grip tracks carry the 360 kg (794 lbs) machine across mud, loose soil and uneven ground, and climb slopes of up to 35°.
• Operator safety: remote operation keeps workers away from flying debris, hidden obstacles and unstable ground.

All-Season Versatility

The HT-BC800 does not sit idle in winter. With the optional front snow thrower attachment, the same carrier clears snow from access roads, yards, solar farm aisles and site entrances. For demanding sites, the optional C7-PLUS industrial high-sensitivity remote controller adds finer control response.

Typical Applications

• Land reclamation and clearing of abandoned farmland
• Forestry firebreak and fuel-break creation
• Utility, pipeline and railway right-of-way vegetation control
• Overgrown lots, wasteland and construction site preparation
• Orchard and plantation undergrowth clearing
• Winter snow clearing with the snow thrower attachment

Technical Specifications

What’s in the Box

• 1 × HT-BC800 remote control brush cutter carrier
• 1 × heavy-duty brush cutter attachment
• 1 × remote control
• 1 × toolbox
• 1 × cutting blade set
• 1 × smart charger

Factory Direct Wholesale and OEM Supply

• Source-factory pricing: buy directly from our production line with tiered wholesale pricing for dealers, rental fleets and contractors.
• OEM / ODM programs: custom colors, private labeling and attachment bundles. See our OEM & export services.
• Compliance documents: EPA, CE and EU Stage V documentation available for import clearance.
• Parts and support: blades, tracks, filters, motors and electrical components available for your service team.

Frequently Asked Questions

What can a remote control brush cutter like the HT-BC800 clear?

The HT-BC800 is built for dense brush, shrubs, briars, saplings, tall weeds and overgrown land. Its 800 mm cutting head runs at 3,600 rpm and mulches vegetation in a single pass. Cutting height adjusts from ground level up to 350 mm to suit the job.

Why diesel instead of gasoline?

Diesel gives high, steady torque under heavy load, good fuel economy (about 1.1 L/h) and easy fuel availability on farms, forestry operations and construction sites, which makes it ideal for long land-clearing shifts.

What slopes can it work on?

The HT-BC800 climbs slopes of up to 35°. Its low profile and heavy-duty rubber tracks keep it stable on rough, uneven ground. For steeper slope mowing, see our remote control slope mowers.

Can it be used in winter?

Yes. With the optional front snow thrower attachment, the HT-BC800 clears snow from roads, yards and site access routes.

Do the brushless motors need maintenance?

The pure copper brushless track motors have no carbon brushes to replace. Routine maintenance focuses on the diesel engine (oil, filters), cutting blades and tracks.